Philips 60PFL8708 Setting up, TV stand and wall mounting, Tips on placement, Power cable, Antenna

Models: 60PFL8708

1 83
Download 83 pages 50.2 Kb
Page 6
Image 6

2

Setting up

2.1

TV stand and wall mounting

TV Stand

You can find the mounting instructions of the TV stand in the Quick Start Guide that came with the TV. In case you lost this guide, you can download it from www.philips.com.

Use the product type number of the TV to look for the Quick Start Guide to download.

Wall mounting

Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately).

Use the following VESA code when purchasing the wall mount

. . .

VESA MIS-F 200x200,M8

To fix the bracket securely, use a screw length as shown in the drawing.

Caution

Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards according to the TV's weight.

Also read the safety precautions before positioning the TV. TP Vision Netherlands B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.

2.2

Tips on placement

Position the TV where light does not shine directly on the screen.

Dim lighting conditions in the room for best Ambilight effect.

Position the TV up to 15 cm away from the wall.

The ideal distance to watch TV from is three times its diagonal screen size. When seated, your eyes should be level with the centre of the screen.

2.3

Power cable

Insert the power cable into the POWER socket of the TV. Make sure the power cable is securely inserted into the TV. Make sure that the power plug in the wall socket is accessible at all times.

When disconnecting the power cable, always pull the plug, never the cable.

Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time.

In Help, press *List and look up Standby for more information on switching the TV on and off.

2.4

Antenna

Locate the antenna connection at the back of the TV. Insert the antenna cable securely into the Antenna asocket.

You can connect your own antenna or connect to an antenna signal from an antenna distribution system (common in certain regions). Use an IEC Coax 75 Ohm RF antenna connector.

Use this antenna connection for DVB-T and DVB-C input signals.

6

Setting up / Antenna

Page 6
Image 6
Philips 60PFL8708 manual Setting up, TV stand and wall mounting, Tips on placement, Power cable, Antenna