Access settings
GSM settings
Register again
Change name

Philips639_APMEA_CTA_GB.book Page 42 Saturday, February 28, 2004 2:40 PM

For data calls

Your phone will automatically register to the GPRS service only when required. This option reduces energy consumption, however it will increase the connection delay.

In spite of these settings, you must still select the bearer (GSM or GPRS) in the menus of each application to be used (e.g., WAP, MMS, e-mail, etc.).

Register again

Provides you with a list of the networks available in the area when the Manual mode is selected. Select the network you

want to register with and press ,to confirm.

Preferred list

Allows you to build a network list in

order of preference. Once defined, the Preferred list phone will try to register on a network,

according to your preferences.

Access settings

This menu allows you to create several data profiles: when using WAP or when sending a multimedia message (MMS),

the selected profile will be used to connect to the GSM or GPRS network.

All options described below are operator and/or subscription dependent.With some operators, you may receive a SMS which contains access parameters that will be stored automatically. Please contact your network operator for detailed information on this subject.

Change name

Allows you to enter or change the name of the selected profile. Press ,, enter the name of your choice and press , to confirm.

Some pre-configured profiles might be locked, preventing re-programming and renaming.

Show

Allows you to visualise all parameters of the selected profile (ISP number, APN,

Show

etc.), either GSM or GPRS.

 

GSM settings

Allows you to enter or change the GSM settings and gives you access to the following items:

Login and Password allow you to enter the login and password needed. In both cases, enter the information and press ,to confirm.

42

 

 

Settings

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 43
Image 43
Philips 639 manual Register again, Preferred list, Access settings