Philips 639 manual Getting started

Philips639_APMEA_CTA_GB.book Page 9 Saturday, February 28, 2004 2:40 PM

1.Once the battery and battery cover are clipped on the phone, plug the charger (supplied with the phone, in the box) into the right hand socket at the base of the phone as shown below.

2.Plug the transformer unit into a main AC power socket with easy access. The battery symbol

indicates the state of charge:

•During charging the 4 charge indicators change; Each bar represents around 25% of charge and it takes around 2.15 hours to fully recharge your mobile phone.

•When all 4 bars are steady the battery is fully charged and you can disconnect the charger.

•When the battery is charged, remove the connector by pressing the release button on top of the connector.

•Depending on the network and condition of use, talk time goes up to 4 hours and standby time up to 400 hours.

Keeping the charger plugged to the mobile when the battery is fully charged doesn’t damage the battery. The only way to turn off the charger is to unplug it, so use an easily accessible AC power socket. You can connect the charger to an IT supply (Belgium only).

3.If you don’t intend to use your phone for several days, we recommend you to disconnect the battery.

You can use the phone while it is on charge. If the battery is completely flat, the battery icon will only reappear after 2 or 3 minutes of charging.

Getting started 9