6 Getting started

1 • Getting started
Read the safety instructions in the “Precautions” section
before use.
To use your phone, you must insert a valid SIM card
supplied by your GSM operator or retailer. The SIM
card contains your subscription, your mobile number,
and a memory in which you can store phone numbers
and messages (see “Phonebook” page27).
1.
Press on the battery clip and slide the battery
cover downwards.
Make sure the phone is switched off before removing
the battery.
2.
Remove the battery by pressing the inner clips
one after the other, then pulling the battery from
the left handside.
3.
Remove the SIM card from its holder and place
it on its slot (be careful that the clipped corner of
the card is in the appropriate corner). Then push
the plastic clip holder, until it stops and
maintains the SIM card.

Insert the SIM card

Philips639_APMEA_CTA_GB.book Page 6 Saturday, February 28, 2004 2:40 PM