FEATURE MENU CONTROLS (CONTINUED)

CABLE TUNING

You need to make sure the TV is set to pick up either Cable TV or Antenna signals. In other words,

the TV needs to know if you connected a Cable TV signal or a normal antenna to its ANTENNA plug.

NOTE: If you went through First Time Setup (in your Quick Use Guide), this task has already been completed for you.

1Select CABLE CHANNEL TUNING control.

With the FEATURES MENU (1 of

5)on screen, move the RED highlight with the MENU buttons. Then press the MENU (or ok) button to select the feature.

MAIN MENU

 

PICTURE

SOUND

FEATURES

 

1ST TIME SETUP

EXIT

DN

mute

1

channel

HDR PTV

+

FEATURE MENU

ANALOG

FORMAT

CLOSED

CAPTIONS

EXIT

CABLE

TUNING

CHANNEL

MEMORY

MORE... 1 OF 5

2Press the MENU ▲▼ buttons to move the RED highlight. Press the center MENU button to select () the desired mode - For Example: CABLE.

CABLE- If you DO have

Cable TV connected to the TV. Channels 1-125 available.

NORMAL- If you have an Antenna connected to the TV. Channels 2-69 available.

3Press the Exit button to clear the screen.

Menu

Source

 

 

volume

 

 

+

 

ok

 

Exit

 

 

3/5 INFO

A/CH

 

3

1

2

 

 

CABLE TUNING

CABLE ANT A

NORMAL ANT A

CABLE ANT B

NORMAL ANT B

EXIT

Note: Both ANT(enna) A and ANT B inputs on the rear of the TV can be set for the correct connected signal (either an Antenna or Cable TV source).

12

Page 12
Image 12
Philips 64PP9751 Cable Tuning, Select Cable Channel Tuning control, Cable TV connected to the TV. Channels 1-125 available