Philips 64PP9751 manual Channel Memory AUTO-PROGRAMMING, Select Channel Memory, Channel buttons

		FEATURE MENU CONTROLS (CONTINUED)
	CHANNEL MEMORY
	AUTO-PROGRAMMING
	our TV can automatically set itself
	Yfor local area (or Cable TV)
	channels. This makes it easy for you
	to select only the TV stations in your
	area when the CHANNEL ▲▼
	buttons are pressed.			MAIN MENU
	NOTE: If you went through First			PICTURE	SOUND
	Time Setup (in your Quick Use			FEATURES				FEATURE MENU
	Guide), this task has already been
								ANALOG			CABLE
	completed for you.			1ST TIME SETUP		EXIT
								FORMAT			TUNING
								CLOSED			CHANNEL
1	Select CHANNEL MEMORY							CAPTIONS			MEMORY
	(START AUTO-PROGRAMMING)							EXIT			MORE...
	control.										1 OF 5
	With the FEATURES MENU (1 of 5)
	on screen, move the RED highlight
	with the MENU	buttons. Then	1	DN			mute
	press the MENU (or ok) button to					channel		CHANNEL MEMORY
					HDR PTV
	select the feature.						+
				Menu	Source			ADD/DELETE
						volume		CHANNELS
2 Press the MENU ▲▼ buttons to							+
					ok			START
	select AUTO-PROGRAMMING ON,
								AUTO-PROGRAMMING
	then press the Menu (or ok) button to			Exit
				3/5 INFO	A/CH	1		EXIT
	begin.
							2
	The TV shows which channel		3
	numbers are "SAVED" (✔) as they
	are added into memory.							AUTO-PROGRAMMING CHANNEL
	"Auto-programming CHANNEL							MEMORY FOR ANT A
	MEMORY is finished" shows when							1	2	3	4
								5	6	7	8
	the TV is through adding channels.
								9	1O	11	12
3	Press the Exit button to clear the							13	14	15	16
							✔ Channel Numbers are	17	18	19	20
	screen.						Saved in Memory	21	22	23	24
									Press "M" to
								Stop Auto-Program
	SMART HELP
	Try it out. Press the
	CHANNEL▲▼ buttons
	and see which channels you can
	select.
	Remember, an Antenna or Cable
	TV signal must first be connected
	to your PTV so that channels can
	be saved.
	If you want to delete any
	unwanted channels from the TV's
	memory, see "ADD/DELETE
	CHANNELS" on the next page.
					13