USING PIP WITH THE REMOTE CONTROL
By using the PIP buttons on the Pronto remote (touchscreen 4 of 5) the PIP picture can be moved
and swapped with the main screen. The main screen picture can also be frozen in the PIP window.
1Press the PIP ON/OFF button to show the PIP picture.
PIP appears in a corner of TV screen. Press PIP ON/OFF again to remove PIP from the main screen.
2Press the PIP POSITION button to move the PIP picture (from
This feature allows you to move PIP and avoid blocking off any main screen action.
3 | With PIP on the TV screen, |
| press the SWAP button to swap |
| the main screen picture with the |
| PIP picture. See "Smart Help" |
| note on this page. |
4 | Press FREEZE to hold the |
| current MAIN screen picture in |
1. PIP ON / OFF
2. PIP POSITION
3. PIP SWAP
SMART
HELP
Remember, if the TV’s Main screen picture is being supplied by an AUX VIDEO connected VCR (or other external accessory source); and then both the PTV and VCR are turned OFF, a blank screen will appear when the PTV is turned back ON again.
If this happens, just reselect the PTV’s ANT A source mode to return to normal TV viewing.
the PIP window (Main picture is |
still active). |
If PIP is currently OFF, the PIP window will automatically appear.
Press FRZ repeatedly to update the frozen PIP with current
|
| HDR PTVLIGHT |
4 | PIP | On/Off |
- | channel + |
4. PIP FREEZE
1
channel
+
volume 2
+
PIP SOURCE SELECT
ANT A ANT B
AUX 1 VIDEO
AUX 2 VIDEO
AUX 2 VIDEO
SIDE VIDEO
pictures from the Main screen.
You cannot reposition a frozen PIP picture.
Press the PIP ON/OFF button to drop the frozen PIP picture from the screen.
5Press the PIP SOURCE button to change the signal input source (ANT B, etc.) for the PIP window shown on the PTV screen.
Press the PIP CH(annel) Up and Down (DN) buttons to select channels shown within the PIP window (when an antenna/cable signal source is connected for use with PIP).
Size | Position |
Freeze | Source |
Swap | |
4/5 INFO | A/CH |
3
5. PIP SOURCE & PIP CH UP/DN
5
46