PICTURE MENU CONTROLS (CONTINUED)
RED/BLUE CONVERGENCE
Convergence is the correct lining up of the red and blue
light paths on the TV screen. NOTE: If no color fringing (see Smart Help) shows, then no Convergence adjustments are necessary for your TV.
1Select CONVERGENCE control.
With the PICTURE MENU (2 of
MAIN MENU |
|
PICTURE | SOUND |
FEATURES |
|
1ST TIME SETUP | EXIT |
PICTURE MENU
COLOR |
BRIGHT 
SHARP 
EXIT |
TINT |
PICTURE 
CLEARVIEW 
MORE... 
1 OF 3 
3)on screen, move the RED highlight with the MENU 
buttons. Then press the MENU (or ok) button to select the feature.
2If there is RED or BLUE color fringing (see note below) on your PTV, press the MENU ▲▼
buttons to move the highlight. Press the MENU (or ok) button to select the Align Red or Align Blue Convergence control.
3Press the MENU 
buttons to move the red or blue cross directly over the white cross on the TV screen.
The red or blue cross is properly adjusted when it is completely merged with the white cross. (No color appears around the edge of the white cross).
4Press the Exit button to clear the screen when convergence adjustments are complete.
1 | DN |
|
| mute |
|
|
| channel | |
|
|
| HDR PTV | + |
| Menu | Source |
| |
|
|
|
| volume |
|
|
|
| + |
|
|
| ok |
|
|
| Exit |
|
|
| 3/5 | INFO | A/CH | 1 |
|
|
|
| |
4 |
|
|
| 2 |
|
|
| 3 | |
|
|
|
| |
PICTURE MENU |
|
CONVERGENCE |
|
FLESH CORRECTION |
|
VIDEO ENHANCEMENT |
|
EXIT | MORE... |
| 2 OF 3 |
CONVERGENCE MENU ALIGN RED
ALIGN BLUE
CONVERGE MULTI POINT BACK
SMART HELP
Remember. Convergence 
has been set at the factory for best viewing, but if one or more of
the (red or blue) colors appear around the edges of objects (color fringing) follow the steps given in this section.
|
| PRESS | TO ALIGN RED | |||
|
| PRESS MENU TO RETURN | ||||
NOTE: Adjustments for |
|
|
|
|
| |
CONVERGENCE MULTI POINT |
| |||||
fringing can also be made as | CONVERGE RED POINTS |
| ||||
CONVERGENCE | ||||||
CONVERGE BLUE POINTS | ||||||
part of the TV’s Convergence | RESTORE FACTORY SETTINGS | |||||
|
|
| ||||
SAVE ADJUSTMENTS |
|
|
| |||
control system. Follow the TV’s | BACK |
|
|
|
| |
| CONVERGE RED POINTS |
|
|
| ||
|
|
|
| |||
| USE TO ADJUST |
|
|
| ||
select individual screen areas that can | DIGIT 2, 4, 6, 8 TO MOVE CURSOR |
|
| |||
be readjusted and set for varying |
| PRESS MENU TO RETURN |
|
|
| |
| PRESS MENU NOW TO CONTINUE |
|
| |||
red/blue color fringing conditions. |
|
|
| |||
|
|
|
|
| ||
These |
|
|
|
| ||
“Saved” to memory for the specific areas of the TV |
|
|
| |||
screen (or Factory Settings for convergence can be |
|
|
| |||
recalled and put back into place for use). |
|
|
|
| ||
8
