Philips 825 manual First call, Charge the battery

3The SIM phonebook is the default and you must select Phonebook > Phonebook Settings > Phonebook select > In phone to switch phonebooks.

First call

1 Enter the phone number (if you make a mistake, press e) and press

+.

2 Once connected, your phone emits 2 beeps. To end the call, press -.

Charge the battery

Your phone is powered by a rechargeable battery. A new battery is partially charged and an alarm will warn you when the battery reaches low.

L We recommend that you do not remove the battery when the phone is switched on: you may lose all your personal settings (see info on battery safety, page 89).

1Once the battery is clipped on the phone, plug the charger (supplied with the phone, in the box) into the right hand socket at the base of the phone as shown below.

2Plug the transformer unit into a main AC power socket with easy access. The symbol indicates the state of charge:

•During charging the 4 charge indicators change; Each bar represents around 25% of charge.

•When all 4 bars are steady the battery is fully charged and you can disconnect the charger.

•When the battery is charged, remove the connector by pressing the release button on top of the connector.

Get started 11