Disconnection also occurs each time you enter the Settings menu while a connection is in progress. In this case, your e-mail is lost.

Depending on the call settings you configured (see “Call waiting” page 37), you can receive calls during an e-mail connection. In this case, and if you accept the incoming call, your phone switches to the call screen context and the e-mail menu is closed; the phone goes back to idle when you hang up.

With an attachment

 

1

Repeat steps 1 to 7 described above. Select Attach file and press ,.

Attach file

2

A list appears, showing the available JPEG files. Select the picture you wish

 

 

to send and press ,.

 

L You can only attach one JPEG file at a time. If you exit the Send e-mailmenu

 

 

before sending your e-mail, its content (including attachment) is deleted without

 

 

being stored.

 

3

Then select Modify mail or Send now and press ,to confirm.

Receive and read e-mails

E-mails are received on a server, which you must connect to in order to retrieve your e-mails on your mobile phone (some operators send you a SMS when you receive a new e-mail). You must first download the headers from the server, before retrieving the corresponding e-mails.

Connect to the server

Connection process

1

Press Cand select E-mail, then Mailbox 1 or Mailbox 2 depending on

Open mailbox

the one you wish to use. Select Open mailbox and press ,.

2Your mobile phone automatically connects to the e-mail server and downloads the e-mails headers. If you didn’t receive any e-mail, List empty is displayed on the screen. Otherwise, the e-mail headers are displayed in the form of a list.

3The total number of mails received and pending on the server is displayed on the top of the screen, as well as the number of pages needed to display all headers.

4Your mobile phone retrieves five e-mails headers at a time. If Next (respectively Previous) appears at the end (respectively beginning) of the

66

E-mail

Page 68
Image 68
Philips 825 manual Receive and read e-mails, Connection process, With an attachment, Being stored, Connect to the server