Bluetooth setting

This menu allows you to set and manage the options relating to Bluetooth. In

order to communicate with the different wireless devices you will be using, Bluetooth Settings Bluetooth must be set in stand-by mode. To change the default value of the

stand-by duration time (set to 15 mn), proceed as follows:

1Press Cand select Buetooth, Bluetooth Setting, Bluetooth On/Off and press ,.

2Press 4or 6to change the duration time and set it either to Off, 15 mn, 1 hour or Always on. Then press ,to confirm.

When the stand-by duration time is over, stand-by mode is automatically reactivated when receiving a call or by pressing the configured hotkey (see “Hotkeys” page 32).

L Your mobile phone will NOT answer the Bluetooth connection requests of wireless devices and accessories if the stand-by duration time is set to Off. We advise you to turn Bluetooth Off when not using it, as it increases energy consumption.

Pair and use a Bluetooth audio accessory

Bluetooth headset

This menu allows you to launch the pairing process with a Bluetooth headset.

BT headset Bluetooth devices must first be paired to each other (e.g the headset to your mobile phone) before being used together; this process must be performed at

least once for two specific devices to communicate and is described below.

Pairing process

1Turn both the mobile phone and the headset on and place them near each other (refer to the headset documentation for information on pairing).

L When turned on, the headset beeps or flashes. We recommend that you do not wear the headset on your ear while proceeding with authentification process.

2Press Con your mobile phone and select Bluetooth, Bluetooth Settings, Bluetooth Headset, Detect and press ,. An animated icon appears on

the screen, showing that your mobile is searching the headset.

L Pairing authentification should take place within 10 seconds. If it fails, you should switch the headset into authentification mode again, as described above.

Bluetooth 71 features

Page 73
Image 73
Philips 825 manual Pair and use a Bluetooth audio accessory, Stand-by duration time set to 15 mn, proceed as follows