2Select Settings > Regular Call >
Recall time. Press Select.
3Select the new setting. Press OK.
• The setting is saved.
13.4.7.1Setting the recall pause time
There are 2 recall pause time options: Pause 1 and Pause 2.
1Press Menu.
2Select Settings > Regular Call >
Recall Pause Time. Press OK.
3Select the new setting. Press OK.
• The setting is saved.
13.4.8 Dial mode
This feature only applies to model(s) that support both tone and pulse dialing. Dial mode is the telephone signal used in your country. Your phone supports tone (DTMF) and pulse (rotary) dialing. Your phone shall already be set up for use in your country. For details, consult your service provider.
13.4.9Setting the dial mode
1 Press Menu.
2 Select Settings > Regular Call > Dial
mode. Press Select.
3 Select the new setting. Press Select.
• The setting is saved.
Tip
Temporary Tone. If your phone is in pulse dialing, press *during a call for temporary tone mode. '*' displays. Digits entered after '*' are sent out as tone signals (for this call only).
Calling Features
13.4.10Pause selection
This feature only applies to model(s) with pause selection support.
A pause is a break you can enter when making a call. A pause is used for calls such as PABX and operator services. For details, consult your service provider.
13.4.10.1Activating PABX
1 Press Menu.
2 Select Settings > Regular Call >
PABX. Press OK.
3 Select the new setting. Press OK.
• The setting is saved.
13.4.11First Ring
This feature only applies to model(s) with first ring support.
If you have subscribed for Caller ID service with your service provider, your phone can suppress the first ring before the Caller ID. After resetting, your phone will automatically detect if Caller ID service is subscribed and start to suppress the first ring. You can change this setting to suit your preference.
13.4.12Turning first ring on/off
1Press Menu.
2Select Settings > Regular Call > 1st
ring. Press Select.
3Select the new setting. Press OK.
• The setting is saved.
Note
Reset First Ring Status. To reset the first ring status, you can reset the system from the Reset menu. See “Reset the default settings” on page 50.
43
