16.4Change the system PIN The system PIN is used for registering, deleting handsets, and protecting the access rights to some of the other menus. The default system PIN is 0000. You can

personalize the PIN for greater security. 1 Press Menu.

2Select Settings > Advanced > Change PIN. Press Select.

3Enter the system PIN. Press OK. Use Clear to make corrections.

4Enter the new system PIN. Press Enter.

5Enter the new system PIN again for verification. Press Enter.

• The setting is saved.

Note

Write down your PIN and save it for future use. If you have forgotten the PIN, call your dealer for assistance.

16.5Reset the default settings The default settings are the original

factory settings of your phone.

1 Press Menu.

2 Select Settings > Advanced > Reset settings. Press Select.

3 Select Reset all to reset all the settings including the network settings,

OR

3 Select Keep Network to reset all the settings except the network settings.

4 Press Select. Enter the system PIN. Press Enter to confirm. Use Clear to make corrections.

A confirmation request is displayed.

5Press Yes to confirm

• All settings have reset.

Note

After reset, your base's power switches off. It will switch back on in a few seconds after updating all the settings.

See “Default (pre-programmed) settings” on page 59 for the original factory settings.

16.6Network settings

This section describes the information on viewing and changing the Internet network settings of your phone. You shall not need to configure the network after setting up the phone. This section is recommended for advanced users who want to configure the network with their static IP address.

!Warning

Incorrect settings will affect Skype usage on this phone. We recommend that you consult your network administrator or service provider before making any changes to the network settings.

16.6.1View your network setting

1 Press Menu.

2 Select Settings > Network > Information. Press Select.

3 View the information. Press OK when finished.

16.6.2DHCP

By default, DHCP is activated. If you configure the network to use your own static IP address, DHCP will be deactivated. You can re-activate DHCP.

50

The System

Page 53
Image 53
Philips 855 Select Settings Advanced Change PIN. Press Select, Select Settings Advanced Reset settings. Press Select, Dhcp