User Manual BDL4631V/00
24
Power Indicator
Status
Power ON
Green
Power OFF
Red
Power Standby when
“SCHEDULE” is enable
Red On
Green Blinking
Power Standby
Red, Green
Diagnosis
(Detecting failure)
Red Blinking
* See troubleshooting
Using Power Management
The LCD monitor follows the VESA approved DPM Power Management function.
The power management function i s an energy saving function that automatically reduces the power consumption of the display wh en the keyboard or
the mouse has not been used for a cert ain period.
The power management feature on the LCD monitor h as been set to the “ON” mode. This allows the system to enter a Power Saving Mode when no
signal is applied. This could poten tially increase the life and decrease the power consumption of the LCD m onitor.
Display Signal of Video Source Setting to [VIDEO]
Use the input button on the front panel or the VIDEO SOURCE button on the remote control to set video source to [VIDEO].
Use the COLOR SYSTEM OSD menu to select [ AUTO], [NTSC], [PAL], [SECAM], [PAL60], [4.43NTSC], according to your video format.
Picture Size
HDMI 1, 2, PC-A
FULL NORMAL CUSTOM
REAL
CVI , VIDEO
FULL NORMAL DYNAMIC
REAL CUSTOM
Signal Type
NORMAL SIZE
Recommended Size
4:3
NORMAL
DYNAMIC
Squeeze
FULL
NORMAL: Display with the input signal aspect ratio from PC signal, or display in 4:3 aspect ratio at CVI or VIDEO signal.
FULL: Display in the entire screen.
DYNAMIC: Expand 4:3 pictures to the entire screen with non -linearity. (Some round image might be cut by expansion.)
CUSTOM (ZOOM): Images can be ex panded beyond the active display area. The image which is outside of the active display area would not be
shown.
REAL: Image will be displayed for one by one pixel.
ZOOM
ZOOM