Philips BDP2700 user manual Audio setup, Network setup

[HDMI Deep Color]

This feature is available only when the display device is connected by an HDMI cable, and when it supports deep color feature.

•[Auto] - Enjoy vivid images in over a billion colors on Deep Color enabled TV.

•[On] - Enjoy vivid images in over a billion colors on Deep Color enabled TV. Output 12 bit color that reduces the posterization effect.

•[Off] - Output standard 8 bit color.

[Picture Settings]

Select a predefined set of picture color settings.

•[Standard] – Original color setting.

•[Vivid] – Vibrant color setting.

•[Cool] - Soft color setting.

•[Action] – Sharp color setting. It enhances the details in the dark area. Ideal for action movies.

•[Animation] – Contrast color setting. Ideal for animated pictures.

Audio setup

1Press .

2Select [Setup], and press OK.

3Select [Audio], and press .

Video	Off
Audio	Auto
	Auto
Network	On
EasyLink
Preference
Advanced

4Select an option, then press OK.

5Select a setting, then press OK.

•To return to the previous menu, press BACK.

•To exit the menu, press.

[Night Mode]

Increase a soft sound level such as dialogue to make it easier to hear at a low volume, while simultaneously decreasing a loud sound level.

•[Auto] - Detect and select a best sound level at a low volume. Applicable to tracks with Dolby TrueHD audio only.

•[On] – For quiet viewing at night.

•[Off] – For surround sound with a full dynamic range.

Note

•Applicable only to Dolby encoded DVD-video or BD- video.

[HDMI Audio]

Select an HDMI audio output when you connect this player and the TV/audio device with an HDMI cable.

•[Bitstream] – If the connected HDMI device supports the appropriate HD audio decoder,the original audio format on the disc is sent. Otherwise, LPCM is sent.

•[Auto] – Detect and select the best supported audio format automatically.

[Digital Audio]

Select an audio format for the sound output from the DIGITAL OUT jack (coaxial/optical).

•[Auto] - Detect and select the best supported audio format automatically.

•[PCM] - The audio device does not support multi-channel format. Audio is downmixed to two-channel sound.

•[Bitstream] - Select the original audio to experience Dolby or DTS audio (BD-video special sound effect is disabled).

Note

•Ensure that the audio format is supported by the disc and the connected audio device (amplifier/receiver).

•When [Bitstream] is selected, interactive audio like button sound is muted.

[PCM Downsampling]

Set the sampling rate for PCM audio output from the DIGITAL OUT jack (coaxial/optical).

•[On] - PCM audio is down-sampled at 48kHz.

•[Off] - For BD or DVD recorded in LPCM without copyright protection, two-channel audio signals up to 96 kHz are output as LPCM signals with no conversion.

Network setup

1Press .

2Select [Setup], and press OK.

3Select [Network], and press .

18EN