Care
Caution
•Never use solvents such as benzene, thinner, cleaners available commercially, or
Clean discs
Wipe the disc with a micro fibre cleaning cloth from the centre to the edge in a straight line movement.
Specifications
Note
•Specifications are subject to change without notice
Video
•Signal system: PAL / NTSC
•Composite video output: 1
•HDMI output 480p, 576p, 720p, 1080i, 1080p, 1080p24
Audio
•2 Channel analog output
•Audio Front L&R : 2 Vrms (> 1 kohm)
•Digital output: 0.5
•Coaxial
•HDMI output
•Sampling frequency:
•MP3: 32 kHz, 44.1 kHz, 48 kHz
•WMA: 44.1 kHz, 48 kHz
•Constant bit rate:
•MP3: 112 kbps - 320 kpbs
•WMA: 48 kpbs - 192 kpbs
USB
•Compatibility:
•Class support: UMS (USB Mass Storage Class) Main unit
•Power supply rating: 220~230V ~AC, ~50 Hz
•Power consumption: 18 W
•Power consumption in standby mode: < 1 W
•Dimensions (w x h x d): 435 x 44 x 223 (mm)
•Net Weight: 2.15 kg
Accessories supplied
•Remote control and batteries
•Quick start guide
•User manual
•
Laser Specification
•Laser Type:
•BD Laser Diode: SLD3134VL
•DVD Laser Diode: SLN6167XL
•CD Laser Diode: SLN6167XL_
•Wave length:
•BD: 405nm(Typ.)
•DVD: 658nm(Typ.)
•CD: 790nm(Typ.)
•Output power:
•BD: Max. ratings: 20mW
•DVD: Max. ratings: 7mW
•CD: Max. ratings: 7mW
8 Troubleshooting
Warning
•Risk of electric shock. Never remove the casing of the player.
To keep the warranty valid, never try to repair the player yourself.
If you have problems using this player, check the following points before you request service. If you still have a problem, register your player and get support at www.philips.com/welcome.
Main unit
No reaction to the remote control.
•Connect this player to the power outlet.
•Point the remote control at the IR sensor located on the front panel of this player.
•Insert the batteries correctly.
•Insert new batteries in the remote control.
Picture
No picture.
•See TV manual for correct video input selection. Change the TV channel until you see the Philips screen.
No picture on HDMI connection.
•If this player is connected to an unauthorized display device with an HDMI cable, the audio/ video signal may not be output.
•Check if the HDMI cable is faulty. Replace a new HDMI cable.
•On the remote control, press 
and then press “731” (numeric buttons) to recover picture display.
22EN
