User Manual BDS4621
| 30° | 30° |
|
Left | 10m Front | Right | |
|
| ||
Upper 20°
20°
Lower
Inserting of Remote Control Batteries
•Turn the remote control upside down, press and slide off the battery cover.
•Insert two AA batteries in the remote control as shown in the diagram. (Positive + and negative polarities - must match the markings in the compartment).
•Place the cover in reverse order until the lock snaps.
Scope of Remote Control
•Be sure the remote control is pointed towards the remote control window on the display.
•No obstacles should be placed between the remote control and the remote control window.
•The effective receiving scope for the signal is 10 meters to the front of the remote control window, and 30 degrees to the left or right side and 20 degrees above or below the control window.
Use of Remote Control
•To ensure a normal operation, the remote control should not be dropped or damaged in any way. It should also be kept dry and away from all heat sources.
•Battery replacement is necessary when the remote control acts inconsistently or stops operating the Plasma Display.
17
