
User Manual BDS4621
1.SERIAL COMMUNICATION PROTOCOL (RS-232)
This serial communication protocol can be used to control the BDS4621 plasma display remotely through the serial RS232C port. This information is provided as is.
Philips cannot accept any liability for damages or malfunctioning of the display caused by operation through the serial port.
The external communication protocol include two parts:
• setup connecting,
• send command.
Default Serial Port:
Baud Rate: | 19200 |
Parity: | none |
Data bits: | 8 |
Stop bits: | 1 |
Flow Control: | none |
1.1. Setup Connecting
A typical Packet transaction session is shown in
Figure 1
Figure 1
48