English 7

Caution

-- Use, charge and store the appliance at a temperature between 5°C and 35°C.

-- Only use the adapter and the charging stand supplied to charge the appliance.

-- Never immerse the charging stand in water nor rinse it under the tap. -- If the appliance is subjected to a major change in temperature, pressure

or humidity, let the appliance acclimatise for 30 minutes before you use it. -- If the adapter or charging stand is damaged, always have it replaced

with one of the original type in order to avoid a hazard.

-- Do not use the appliance if any of its parts is damaged or broken, as this may cause injury.

-- This appliance is only intended for shaving and trimming body parts below the neckline. Do not use it to shave or trim facial or scalp hair.

Compliance with standards

-- The appliance complies with the internationally approved IEC safety regulations and can be safely used in the bath or shower.

-- This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields.

Charging

Charging takes 1 hour (BG2038/BG2036) or 8 hours (BG2028/BG2026/ BG2025/BG2024) depending on the model. When the appliance is fully charged, it has an operating time of up to 50 minutes.

When the battery status indicator flashes red, the battery is running low (approx. 10 minutes of operating time left) and you need to recharge the appliance.

1Insert the small plug into the charging stand. 2 Put the appliance in the charging stand.

,, The battery status indicator flashes green to indicate that the appliance is charging.

Note:The battery status indicator of BG2028, BG2026, BG2025 and BG2024 looks different, but works in the same way.

Page 7
Image 7
Philips BG2028, BG2036, BG2024, BG2026, BG2025 user manual English, Compliance with standards, Charging