Bluetooth Operation
5Select “PHILIPS BTM630” to start pairing.
6Enter “0000” when prompted for a keyword.
7Wait for completion of the pairing until you hear a double beep from the system and the bluetooth icon turns on.
➜If the connected device (mobile phone) supports the HFP and/or HSP profiles, the display panel of the system will show “PHONE CONNECTED” briefly.
➜If the connected device (mobile phone or other device) supports the A2DP profile, the display panel of the system will show “PHONE CONNECTED” followed by “STEREO CONNECTED” briefly.
➜You may be asked to grant permission for "AVRCP" or "Remote Control" functions.You should grant this permission for complete connection.
➜The name of the paired device will appear on the display panel after successful pairing.
8Repeat the above steps if you want to pair more
To disconnect a paired device
●Switch off the device or move it beyond the communication range.
➜“DISCONNECT PHONE” or “DISCONNECT STEREO” will appear on the display panel of the system briefly when the connection is terminated.
➜You will hear a long beep from the system.
To disconnect all paired devices
●Press and hold on REJECT
for more than 5 seconds until “DISCONNECT ALL” appear on the display panel of the system.
➜ No message on the display panel indicates that there is no active connection to terminate.
Notes:
–The system can store pairing information of up to 7 devices.You do not need to pair a device every time you want to reconnect it with this system.As long as the system is powered on and the reconnection function of device is activated, the paired device will reconnect to the system whenever it comes into the communication range.
–If an eighth device is paired, the pairing information of the first paired device will be overwritten.
–“FAILED” will appear on the display panel of the system if no pairing is made within one minute. In this case, please refer to the related items in “Troubleshooting” for a solution to the problem.
Operating a connected
BTM630 is designed with a
Notes for the speakerphone:
–To achieve the best performance from your system, please follow these guidelines for placement and use of the speakerphone:
1)Choose a quiet environment.
The microphone on the unit will pick up your voice, as well as some amount of background noise. Using this unit in a quiet place will make it easier for the party you are calling to hear your voice.
2) Minimize echo in the room.
Using this unit in a room that has carpets, drapes and soft furnishings will give better performance than using in a room with highly reflective surfaces such as tile, concrete and glass.
3) Keep in range of the microphone.
The closer you speak to the microphone, the more clearly your voice will be heard. If you are within 2 meter of the microphone you may talk at a normal volume and your voice should be clear to the party you are calling. If you move beyond 3 meter, you will need to raise your voice in order to be heard clearly. Use beyond 5 meter range is not recommended.
4) Choose a sensible listening volume.
This unit is designed to perform best at moderate listening levels. If you increase the volume too much, you may begin to hear an echo.The best listening level is normally a maximum volume level of 16.
English
25
