Philips BTM630 Place the unit in line with your mouth, Holding a call through the system for a

Bluetooth Operation

English

5) Place the unit in line with your mouth.

If you will be using this unit while sitting down, place the unit at tabletop level, in line with the level of your mouth. Placing the unit on a high cabinet or on the floor may reduce the pick-up of the microphone.

Receiving a call through the system (for

a connected mobile phone supporting

the HFP and HSP profiles)

When there is an incoming call to the connected mobile device, you will hear an incoming call alert tone from the speakers of the system and the display panel of the system will show “IN CALL” and the calling number (if available). In this case, you can:

● Press ANSWER/PAIRING on the top of the system or the remote control to accept the call.

➜The display panel of the system will show “CALLING”.

●Press REJECT on the top of the system or the remote control to reject the call.

➜The display panel of the system will show “END CALL”.

● Press and hold ANSWER/PAIRING on the top of the system or the remote control to transfer sound from system speakers to the mobile phone or conversely.

➜The display panel of the system will show “TRANSFER”.

Holding a call through the system (for a

connected mobile phone supporting the

HFP and HSP profiles)

To resume sound input of the microphone

●Press MUTE on the remote control again. ➜ The display panel of the system will show “CALLING”.

Listening to music from the connected

device through the system (for a device

supporting the A2DP profile)

BTM630 allows you to connect your A2DP- capable device and stream high-quality stereo music over Bluetooth to the system for playback. If the connected device also supports the AVRCP profile, you can also control music playback of the connected device from the system or its remote control:

●Press ÉÅ to start playback.

●Press ÉÅ again to pause playback.

●Press S/T on the top of the system (or ¡ / ™ on the remote control) to select a track.

●Press 9 to stop playback.

●During a call, you can press MUTE on the remote control to mute the microphone (speakerphone) so that the other party cannot hear your voice.

➜ The display panel of the system will show “MIC MUTE”.

26