3. Operating the monitor
3. Operating the monitor
3.1 Introduction
This monitor allows you to share the images between your laptop and the monitor by simply connecting USB cable to your laptop.
3.2DisplayLink Graphics Software Installation
In order to use your USB monitor as a secondary display, DisplayLink Graphic software is required to be installed in your Windows system. Moreover, the software allows you to easily control your preference when viewing images.The driver is compatible with Microsoft Windows systems including Microsoft Windows 7,Vista and XP. Please note that this display will not work in DOS.
The installation procedure:
1.Double click Setup.exe file in CD disk enclosed, then the User Account Control window
User Account Control
?Do you want to allow the following program to make changes to this computer?
|
| Program name: | DisplayLink Core Software |
|
| |||
|
| Verified publisher: | DISPLAYLINK |
|
| |||
|
| File origin: | Removable media on this computer |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| Show details |
| Yes |
|
| No |
|
Change when these notifications appear
2.Click [Yes], then DisplayLink software end user license agreement window opens.
3.Click [I Accept], then software start to install.
Note
The screen may flash or go black during the installation.The installation box above will disappear but no message will be shown at the end of the installation.
4.After the software is installed completely, connect your USB monitor to your laptop with USB cable and then below “Found new device” will be shown on the taskbar.
i Found new device
DisplayLink Display Adapter (0395)
5.When the device is found, then DisplayLink Graphics will automatically install.
6.After the installation has completed, your laptop will require to reboot the system in order to start to use the USB monitor.
7.You will be able to see pictures on the USB monitor after Windows completes bootup process.
14
