Philips C221S3 user manual Safety Information, Disconnecting Device

1. Important

1. Important

The monitor is intended for use with Medical Equipment to display alpha, numerical and graphical data.The subject equipment Philips monitor is powered by an external recognized AC/DC adapter (IEC/EN60601-1).

1.1 Safety Information

Power adapter

This adapter (Manufacture: Philips, Model: TPV-15W-05) is a forming part of the medical device.

The connection of external equipments

External equipment intended for connection to signal input/output or other connectors, shall comply with relevant UL / IEC standard (e.g. UL 60950 for IT equipment, UL 60601 and ANSI/ AAMI ES606011 / IEC 60601 series for systems

–shall comply with the standard IEC 60601- 1-1, Safety requirements for medical electrical systems. Equipment not complying with MOPP of ANSI/AAMI ES606011 shall be kept outside the patient environment, as defined in the standard.

Disconnecting Device

The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Always completely disconnect the power cord set from your product whenever you are working or cleaning on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive electronic components.

Classification

•Degree of protection against the ingress of water: IPX0

•Equipment not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen or nitrous oxide. (Non AP or APG Category)

•Mode of operation: Continuous

•Type of protection against electric shock: Class II equipment

•No applied part.

Shutdown Procedure

We strongly recommended that you should shut down the system before you start to clean any single components.

Please follow the steps below.

•Close all application programs

•Close operating software

•Turn off power switch

•Disconnect power cord set

•Remove all devices

Safety Symbol Description

The following safety symbols are the further explanations for your reference.

Medical component

With respect to electric shock, fire and mechanical hazards only in accordance with ANSI/AAMI ES60601-1, and CAN/CSA C22.2 NO. 60601-1

Attention, consult ACCOMPANYING

DOCUMENTS.

Attention, consult ACCOMPANYING

DOCUMENTS.

Type of protection against electric shock:

Class II equipment

Type of Current- AC

European Community Approval

The monitor complies with the 93/42/ EEC and 2007/47/EC and conforms to the applicable following standards: EN60601- 1, EN 60601-1-2, EN 61000-3-2 and EN 61000-3-3.

TUV Type Testing Approval

The monitor complies with the EN60601-1 and IEC60601-1 of European Standards.

Note

•Caution: Use suitable mounting apparatus to avoid risk of injury.

•Use a power cord that matches the voltage of the power outlet, which has been approved and complies with the safety standards of your particular country.

•Keeping to clean your monitor by monthly.

1