1. Important
1.2Safety precautions and maintenance
Warnings
•We strongly recommended that you should shut down the system before you start to clean any single components.
•No modification of this equipment is allowed.
•Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards.
•Read and follow these instructions when connecting and using your computer monitor.
Operation
•Please keep the monitor out of direct sunlight, very strong bright lights and away from any other heat source. Lengthy exposure to this type of environment may result in discoloration and damage to the monitor.
•Remove any object that could fall into ventilation holes or prevent proper cooling of the monitor’s electronics.
•Do not block the ventilation holes on the cabinet.
•When positioning the monitor, make sure the power plug and outlet are easily accessible.
•If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds before attaching the power cable or DC power cord for normal operation.
•Please use approved power cord provided by Philips all the time. If your power cord is missing, please contact with your local service center. (Please refer to Customer Care Consumer Information Center)
•Do not subject the monitor to severe vibration or high impact conditions during operation.
•Do not knock or drop the monitor during operation or transportation.
Maintenance
•To protect your monitor from possible damage, do not put excessive pressure on the monitor panel. When moving your monitor, grasp the frame to lift; do not lift the monitor by placing your hand or fingers on the monitor panel.
•Unplug the monitor if you are not going to use it for an extensive period of time.
•Unplug the monitor if you need to clean it with a slightly damp cloth.The screen may be wiped with a dry cloth when the power is off. However, never use organic solvent, such as, alcohol, or
•To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water, or excessive moisture environment.
•If your monitor gets wet, wipe it with dry cloth as soon as possible.
•If foreign substance or water gets in your monitor, please turn the power off immediately and disconnect the power cord.Then, remove the foreign substance or water, and send it to the maintenance center.
•Do not store or use the monitor in locations exposed to heat, direct sunlight or extreme cold.
•In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the monitor in a location that falls within the following temperature and humidity ranges.
•Temperature: 10°C to 40°C
•Humidity: 30% to 75%
•Atmospheric pressure: 700 to 1060 hPa
6
