10 Automatic Channel Setup
Although the TV/VCR may automatically memorize the channels you receive when you turn it on for the first time, you may set up channels again by following these steps.
1
Press the MENU button.
> | PRIM. SETUP |
| PRESS B |
| VCR PROGRAM |
|
|
|
|
| |
| VCR SETUP |
|
|
| REMINDER |
|
|
| BRIGHTNESS |
|
|
| PICTURE |
|
|
2
Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP, then press the F.FWD/B button.
PRIMARY SETUP
>SELECT LANGUAGE AUTO PROGRAMMING CH MEMORY REVIEW
VOLUME BAR | [ON] |
SET CLOCK |
|
SELECT KL CHOOSE B
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STOP/▼ button to select AUTO PROGRAMMING, then press the F.FWD/B but- ton. AUTO CH PROGRAMMING ... will appear on the screen. The TV/VCR distinguishes between TV channels and cable chan- nels automatically, and the TV/VCR will memorize its available channels.
4
Wait for a few minutes. When setup is complete, CHANNELS ARE SET will appear on the screen. Then the programming of the lowest memorized channel number will appear on the screen.
Now, when you press the CH(annel) o/p buttons, you will scan only through channels you receive. You can still select
1
4 Wait for the TV/VCR to set up channels.
Helpful Hints
•Line Input mode will always be channel 00. You cannot delete it. Line Input Mode (A/V IN) is the channel to which you set the TV/VCR when you want to view pro- gramming from another source. For example, you could connect a VCR, camcorder, or DVD Player to the TV/VCR. Details are on page 32.
•You can not select AUTO PRO- GRAMMING at step 3 if you are in Line Input mode.
