Automatic Channel Setup (cont’d) 11
Adding/Deleting Channels
If your channel lineup changes, you may want to add newly avail- able channels or remove channels that are no longer available in your area. You can use the CH(annel) o/p buttons to scroll through only the available channels. To add or delete channels from the TV/VCR’s memory, follow these steps.
1
Press the MENU button.
> | PRIM. SETUP |
| PRESS B |
| VCR PROGRAM |
|
|
| VCR SETUP |
|
|
| REMINDER |
|
|
| BRIGHTNESS |
|
|
| PICTURE |
|
|
2
Press the PLAY/o button or the STOP/p button to select
CHANNEL.
TO ADJUST PRESS { / B
CH123
> | CHANNEL |
| SAVED |
| EXIT |
|
|
| PRIM. SETUP |
|
|
| VCR PROGRAM |
|
|
| VCR SETUP |
|
|
| REMINDER |
|
|
3
Press the CH(annel) o/p buttons or the Number buttons to select the channel you want to add or delete. The chan- nel number will appear in the top left corner of the screen. Saved channel numbers will be yellow. Deleted channel numbers will be red.
TO ADJUST PRESS { / B
CH23
> | CHANNEL |
| SAVED |
| EXIT |
|
|
| PRIM. SETUP |
|
|
| VCR PROGRAM |
|
|
| VCR SETUP |
|
|
| REMINDER |
|
|
4
Press the F.FWD/B button or the REW(ind)/{ button to select SAVED (to add that channel) or DELETED (to delete that channel).
Repeat steps
5
Press the STATUS/EXIT button.
Programming of the channel you added or deleted will appear.
5 2,4
1
3
Helpful Hint
•To review the memorized channels, follow these steps.
1)Press the MENU button.
2)Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Press the F.FWD/B button.
3)Press the PLAY/▲ button or the STOP/▼ button to select CH MEM- ORY REVIEW. Press the F.FWD/B button. A list of programmed chan- nels will appear on the screen.
4)If all the programmed channels don’t fit on the screen, press the F.FWD/B button. If you do not press the F.FWD/B button within 10 sec- onds, the remaining channels will appear on the screen. (If there are no remaining channels, the previous menu will appear.) Or press the REW(ind)/{ button to see the previ- ous screen of channels.
5)Press the STATUS/EXIT button once or twice.
