Philips CCC 092AT, CCC 090AT owner manual Real-Time Counter Memory

Real-Time Counter Memory 41

Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later.

1

Play, fast forward, or rewind a tape to the location that you would like to refer to later. Stop the tape.

2

Press the STATUS/EXIT button. The real-time counter will appear on the screen.

01:08 PM	STOP
CH10

2

3

SLP 1 : 23 : 45

3
While the counter remains on the screen, press the
CLEAR button to reset the real-time counter to zero.
0 : 00 : 00		4
4
While the counter remains on the screen, press the MEM-
ORY button so that M appears on the screen. To erase a
	1,5
real-time counter memory, press the MEMORY button so that the
M disappears from the screen.
M 0 : 00 : 00

5

To go to the tape location where you set the real-time counter to zero, press the REW(ind)/s button or the F.FWD/B button when playback is stopped. When the tape reaches the point at which you set the counter to zero, the tape will stop. Press the PLAY/o button to watch the tape.

Helpful Hints

•The real-time counter memory will not function during Repeat Play mode. Details are on page 40.

•You may only set one real-time counter memory at a time. If you set the real-time counter to zero at a second location, the previous real- time counter to zero setting will be lost.

•The counter automatically resets to zero when you insert a tape.