A
Before you begin, make sure:
●Channels are set. Details are on page 10.
●A tape is in the TV/VCR. The record tab must be intact.
One-Touch Recording 31
4 | Press the STOP/EJECT button |
OTR.on the TV/VCR to stop the |
1
Use the CH(annel) o/p buttons or the Number buttons to select the channel you want to record.
2
Press the SPEED button until the desired recording speed (SP or SLP) appears on the screen. Details are on page 30.
3
Press the REC(ord)/OTR button repeatedly until the desired recording length appears in the upper right corner of the screen. Recording will begin immediately. The REC(ord) light will appear.
OTR | LENGTH 0:30 |
CH12 |
|
LENGTH : PRESS OTR
CANCEL : PRESS CLEAR
4
To stop an OTR before recording is finished, press the STOP/EJECT button on the TV/VCR.
Or, press the REC(ord)/OTR button, then press the CLEAR button, then press the STOP/▼ button on the remote con- trol.
If the end of a tape is reached during an OTR, recording will stop. The TV/VCR will turn itself off and eject the tape. The REC(ord) light will flash rapidly.
The TV/VCR will turn off at the end of the OTR.
1
3
2
Helpful Hints
•To check the time remaining for an OTR, press the STATUS/EXIT button.
•To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired recording length appears on the screen.
•You can not pause an OTR.
•To cancel an OTR but continue recording, press the REC(ord)/OTR button, then press the CLEAR button.
•You cannot record if DEFEAT RECORDING is ON. Details are on page 37.
•You can change the tape speed with the SPEED button while a recording is in progress, but some distortion may appear on the tape.
