34 Timer Recording (cont’d)
4
Use the Number buttons
NOTE: If you select a number that already has been used to store a timer recording, PREVIOUSLY SET PROGRAM will appear on the screen for a few seconds. Then information about the program in that position will appear on the screen. If this happens, press the STATUS/EXIT but- ton. Then use the Number buttons to select another position.
5
Use the Number buttons to enter the channel of the TV program you want to record.
●If you are recording from line input, press 0, 0. A/V IN will appear on the screen.
●If you are recording using a Cable Box, enter the Cable Box output channel (03 or 04). Be sure to select the channel of the TV program at the Cable Box and leave the Cable Box on for the timer recording.
ONE TIME PROGRAM
PROGRAM 1
CHANNEL – – –
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
6
Press two Number buttons for the hour(s) you want the recording to begin. Press two Number buttons for the minute(s) you want the recording to begin. Press 1 for AM or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.
ONE TIME PROGRAM
PROGRAM 1
CHANNEL | 10 |
TIME ON | – |
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
7
Follow the instructions in step 6 to set the recording’s stop time. (AM or PM will be set automatically.)
ONE TIME PROGRAM
PROGRAM 1
CHANNEL | 10 |
TIME ON | 09:30 PM |
TIME OFF | – |
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
Helpful Hints
•If you enter numbers that do not match the TV/VCR’s clock or calen- dar, the entry will be rejected and a question mark will appear on the screen.
•To make corrections while you are programming a timer recording, press the CLEAR button until the item you want to change flashes. Then enter the correct information.
