CCZ256comb.QX33 4/6/99 9:14 PM Page 40
40 Setting Up the VCR Plus+ Programming System (cont’d)
2
Now, compare the channel numbers you have written in the VCR PLUS+ CH. and CABLE/TV CH. columns. You’ll notice that some stations have VCR Plus+ and Cable/TV channel numbers that are the same, and other stations have channel numbers that do not match. Where the channel numbers DO NOT match, you must tell the TV/VCR the VCR Plus+ and Cable/TV channel numbers according to the following steps.
●Make each entry within 60 seconds of the previous entry.
3
Press the COMBI button, then press the MENU button.
2 Examine the lists on page 39.
POWER |
| EJECT |
|
SLEEP | SPEED | MEMORY |
|
REC/OTR |
| PAUSE/STILL | 4 |
| PLAY |
|
REWF.FWD
STOP
MENU | STATUS/EXIT | CLEAR |
1 2
45
78
A.CH 0
CABLE/DBS COMBI
VAR.SLOW
TRACKING
3 |
CH. |
6 |
9 |
+100
VOL.
VCR PLUS+
/ENTER MUTE
F.ADV SLOW
7
6
5
43
Press the PLAY/▲ button or the STOP/▼ button to select VCR SETUP, then press the F.FWD/B button.
5
Press the Number 5 button to select VCR PLUS+ REF.
VCR PLUS+ CROSS REF. MAP
VCR PLUS+ | CABLE/TV |
124– –
125– –
01 – – – – B – –
02 | – – |
03 | – – |
TO SELECT CH PRESS CH ▲/▼
THEN ENTER CH NO.
TO END PRESS EXIT
SMART SMART SKIP INDEX PICTURE SOUND SEARCH SEARCH
6
Look at the lists you filled in on page 39. For stations whose
VCR Plus+ and Cable/TV channels do not match, press the CH(annel). Up/Down buttons until the arrow is beside the VCR Plus+ channel you need. Then, press the Number buttons to enter the corresponding Cable/TV channel from your list. (Enter a “0” before
Note: If you are using a Cable Box/DBS, the Cable/TV channel will be 03 or 04 (the Cable Box/DBS output channel) for every VCR Plus+ channel. You must set the Cable Box/DBS to the channel you want to record; leave the Cable Box/DBS on for the timer recording.
VCR PLUS+ CROSS REF. MAP
VCR PLUS+ CABLE/TV
124– –
125– –
01 | – – – – B | 23 |
02 |
| – – |
03 |
| – – |
TO SELECT CH PRESS CH ▲/▼
TO DELETE PRESS CLEAR
TO END PRESS EXIT
7
Press the STATUS/EXIT button.
Helpful Hints
•To correct a Cable/TV channel num- ber, repeat the steps on this page.
•To clear a Cable/TV channel num- ber, repeat steps
Up/Down buttons to select it. Then press the CLEAR button. Press the STATUS/EXIT button.
•Always enter a “0” before single- digit channels.
•To select line input for the Cable/TV channel, press 0,0. A/V IN will appear
