Philips CCZ256AT owner manual Real-Time Counter Memory, Appear on-screen

CCZ256comb.QX33 4/6/99 9:14 PM Page 51

Real-Time Counter Memory 51

Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later.

1

Play, fast forward, or rewind a tape to the location that you would like to refer to later. Stop the tape.

2

Press the STATUS/EXIT button. The real-time counter will

appear on-screen.

01:08 PMSTOP CH10

STEREO

SLP 1 : 23 : 45

3

While the counter remains on-screen, press the CLEAR button to reset the real-time counter to zero.

5

2

POWER

SLEEPSPEED

REC/OTR

PLAY

REW

STOP

MENU STATUS/EXIT

1 2 3

4 5 6

7 8 9

A.CH 0 +100

EJECT	4
MEMORY
PAUSE/STILL	1
F.FWD
CLEAR	3

CH.

VOL.

0 : 00 : 00

4

While the counter remains on-screen, press the MEMO- RY button so that M appears on-screen. To erase a real- time counter memory, press the MEMORY button so that the M disappears from the screen.

M 0 : 00 : 00

5

To go to a tape location where the real-time counter was reset to zero, press the REW(ind)/ s button or the F.FWD/ B button when playback is stopped. When the tape reaches the point at which the counter was set to zero, the tape will stop. Press the PLAY/o button to watch the tape.

CABLE/DBS	COMBI
		VCR PLUS+
VAR.SLOW		/ENTER	MUTE
TRACKING		F.ADV	SLOW

SMART SMART SKIP INDEX

PICTURE SOUND SEARCH SEARCH

Helpful Hints

•The real-time counter memory will not function during Repeat Play mode. Details are on page 48.

•You may only set one real-time counter memory at a time. If you try to set the real-time counter to zero at a second location, the previ- ous real-time counter to zero setting will be lost.