CCZ256comb.QX33 4/6/99 9:14 PM Page 42
42 Timer Recording With the VCR Plus+ Programming System (cont’d)
4
Press the Number 1 button to record in SP speed, the Number 2 button to record in LP speed, or the Number 3 button to record in SLP speed. Your selection will appear to the right of REC SPEED
ONE TIME PROGRAM
PROGRAM | 1 |
CHANNEL | 09 |
TIME ON | 10:30 PM |
TIME OFF | 11:30 PM |
REC SPEED | SLP |
SP=1 LP=2 | SLP=3 |
START DATE | 10/9/98 |
| FRIDAY |
TO END PRESS EXIT
5
Press the STATUS/EXIT button. PROGRAM WAS COM- PLETED / PLEASE TURN OFF FOR TIMER RECORDING will appear
●If there is not a tape in the TV/VCR, PLEASE INSERT CAS- SETTE also appears
●If there is a tape without a record tab in the TV/VCR, PLEASE REMOVE CASSETTE also appears
6
4
POWER |
| EJECT |
SLEEP | SPEED | MEMORY |
REC/OTR |
| PAUSE/STILL |
| PLAY |
|
REW |
| F.FWD |
| STOP |
|
MENU | STATUS/EXIT | CLEAR |
1 | 2 | 3 |
|
4 | 5 | 6 | CH. |
| |||
7 | 8 | 9 |
|
A.CH | 0 | +100 | VOL. |
|
|
| |
CABLE/DBS | COMBI |
| |
|
| VCR PLUS+ |
|
VAR.SLOW | /ENTER | MUTE | |
TRACKING | F.ADV | SLOW | |
SMART | SMART | SKIP INDEX |
|
PICTURE | SOUND | SEARCH SEARCH |
|
5
6
Turn off the TV/VCR power. The REC(ord) light will flash. If you forget to turn off the TV/VCR, PLEASE TURN OFF FOR TIMER RECORDING appears on the TV/VCR screen two minutes before a timer recording starts.
The TV/VCR must be off for
a timer recording to take place! Make sure there is a tape in the TV/VCR.
Helpful Hints
•To exit the VCR Plus+ programming system at any time, press the STA- TUS/EXIT button. The display will disappear from the screen.
•To stop a started timer recording, press the STOP/EJECT button on the TV/VCR.
•If the power fails, programmed timer recordings will not be lost. The programmed timer recordings will be restored when the clock is reset after the power failure. (The clock will reset itself automatically if you are using the AUTO CLOCK feature. Details are on pages 14 - 17. If you are not using the AUTO CLOCK feature, reset the clock manually; then, the timer recordings will be restored. Details are on pages 12 - 13.) The timer recording will not occur only if the timer recording was scheduled to take place during the power failure.
