ENInstall

Battery life and range

Talk time and stand-by time

When the battery is fully charged, the talk time of your CD535 is approximately 12 hours and the stand-by time is approximately 150 hours.

Low battery warning

The battery level is shown at the top left of the handset screen. When the battery level becomes low, the low battery sensor alerts you by sounding an audible tone and blinking the battery icon.

If the battery level becomes exceedingly low, the phone automatically switches off shortly after the alert and any function in progress will not be saved.

The approximate power levels of your battery are indicated as follows: Battery is fully charged - 3 bars in the battery icon

Battery is partially charged - 2 bars in the battery icon

Battery is running low - 1 bar in the battery icon

Battery is fully discharged - 0 bar in the battery icon

Out of range warning

The indoor and outdoor range of the phone is up to 50 metres and 300 metres respectively. When the

handset moves beyond operation range, the antenna icon will blink.

Configure your CD535

Before you use your CD535, you need to configure it according to the country of use. After charging it for a few minutes, the WELCOME screen appears. Follow these steps to configure your phone:

1.Press any key to display the list of countries.

2.Scroll :to your country.

3.Press mSELECT to confirm your selection.

4.Scroll :to your operator (if necessary).

5.Press mSELECT again to confirm your selection.

6.The default line settings and menu language for the selected country will be automatically configured.

You can still make outgoing calls or receive incoming calls without first defining your country selection.

Depending on your country, the WELCOME screen may not appear. In this case, you are not required to select your country/operator/language settings.

14

Page 14
Image 14
Philips manual ENInstall, Battery life and range, Configure your CD535