Philips CD535 manual Call screening, Controlling the answering machine from an external call

Models: CD535

1 63
Download 63 pages 46.09 Kb
Page 56
Image 56

EN

 

Telephone Answering Machine (TAM)

 

 

 

 

 

3.Scroll : to Activated or Deactivated and press mSELECT to confirm.

Remote access code is to prevent unauthorised access of the answering machine from external callers. The remote access code is the same as the Master PIN of the phone.

Controlling the answering machine from an external call

1.From your external phone, dial home. The answering machine answers and starts playing your greeting message.

2.Within 4 seconds, enter the remote access code (same as your Master PIN code) and press # key. If the code is not correct, the answer machine will drop the line immediately.

3.If the access code is correct, a long beep tone can be heard. If there are new messages, all the new messages will be played immediately and then stop when there are no more new messages.

If there are no new messages, the answering machine will not play any messages.

The following table indicates how to access the below features during remote access procedure:

1

Replay current message or go to previous message.

 

 

2

Play old messages or stop them.

 

 

3

Go to next message.

 

 

4

Delete current message.

 

 

0

Turn the answering machine on/off.

 

 

Call screening

Handset call screening

If Handset Call screening is set to On, when there is an incoming message, you can press mMENU to listen to the message. If you decide to pick up the call, press r. Once the call has been picked up, the recording will stop automatically. If you press e, the call will be cut off and the recording will be ignored.

Set Handset Call Screening

1.Press mMENU, scroll :to Answer Machine and press mSELECT, scroll :to Settings and press

mSELECT, scroll :to HS Screening and press mSELECT.

2.The last selected option is highlighted.

3.Scroll :to On or Off and press mSELECT to confirm.

If you have multiple handsets, only 1 handset can enable handset call screening for each call.

Base Call Screening

If Base call screening is set to On, you can hear the incoming message via the loudspeaker of the base station. If you press e, the call will be cut off and the recording will be ignored.

56

Page 56
Image 56
Philips CD535 manual Call screening, Controlling the answering machine from an external call, Handset call screening