CallEN
Three-party conference call
The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required.
1.Press cto put the external call on hold (the caller can no longer hear you).
2.Intercom is established immediately if there are only 2 registered handsets. If there are more than 2 regis-
tered handsets, the handset numbers which are available for establishing a conference call will be displayed. Press mALL to call all the handsets or press the handset number to select a specific handset, e.g. press 2to call handset 2.
The called handset rings.
3.Press rkey on the called handset to answer the internal call, where both internal callers can talk.
4.Press CONF soft key on the first handset to start the
TIP If Conference mode is activated (see page 46), a
Call waiting
If you have subscribed to Call Waiting service, the earpiece will emit a beep tone to inform you that there is a second incoming call. The number or name of the second caller will also be displayed if you have subscribed to Caller Line Identification service (CLI). Please contact your network provider for more information on this service.
To answer the second call, press r + 2(may be different according to your network).
Caller Line Identification
Caller Line Identification (CLI) is a special service that you may subscribe from your network operator. If you have subscribed to CLI service, and provided the identity of the caller is not withheld, the number or name of the caller (if stored in the phonebook) will be displayed when the phone rings so that you may decide whether to answer the call or not. Please contact your network provider for more information on this service.
21
