Advanced Settings |
| EN |
|
| |
Registration |
| |
The procedures described below are the procedures that you will find in your CD535 handset. The procedures may vary according to the handset you want to register. In this case, please refer to the manufacturer of the additional handset.
Additional handsets must be registered to the base unit before you can use them. Up to 5 handsets can be registered to one base station.
The Master PIN is required before you can register or unregister handsets. The default PIN is 0000.
To register an additional handset
1.On the base station, press and hold c for 3 seconds in
Within 1 minute, the base station is able to accept registration from a handset. If no key is pressed within 10 seconds, the registration procedure will be aborted.
2.At the same time, on the handset, press mMENU, scroll :to Advanced Set and press mSELECT,
scroll : to Registration and press mSELECT.
3.Enter the Master PIN when prompted and press mOK to start registration.
4.Press : to select the Base to be registered to and press mOK to confirm.
If the base is found and the PIN is correct, the unused handset numbers will be displayed and you can select a handset number by entering the number directly.
If the PIN is incorrect, Incorrect PIN will be displayed and the handset returns to
A long confirmation tone is emitted to indicate successful registration and the screen returns to
Select Base
One CD535 handset can register up to 4 different CD535 Base stations. By default, the handset will register to BASE 1. If you select Any Base, the handset will register to the nearest base station.
To manually select a base station
1.Press mMENU, scroll : to Advanced Set press mSELECT, scroll : to Select Base and press mSELECT.
2.Scroll : to the desired base station and press mOK to confirm.
3.The handset will start searching for the base station. If the selected base is found, a long confirmation tone is emitted.
43
