xp CDR 600/00_01 English 06-04-2001 18:19 Pagina 21
Recording / Playing
Erasing CDRW discs content
For unfinalized CDRW discs only!
You can erase:
-Tracks can only be erased from the end.
-With the EASY JOG you can select more then one track to be erased simultaneously.
Note: It is not possible to erase tracks within the sequence.
- It is also possible to erase the entire disc at once.
To erase one or more tracks from the end:
1Press ERASE once.
➜The display will show the number of tracks and their total playing time. ERASE TRACK and PRESS RECORD will light up.
0If the disc is finalized, CD will appear on the display after inserting a CDRW in the recorder.The recorder will ask you to confirm unfinalizing first. Confirm by pressing the EASY JOG/ENTER key or ENTER on the remote control.
2Select the track(s) you wish to erase by turning the EASY JOG/ENTER key to the left.
➜The selected track numbers will start blinking on the track bar.
➜The display will show the remaining time after erasing the selected track(s).The track shown will be included in the tracks erased.
3Press RECORD.
➜The display will show the total countdown time and ERASE.
➜After the selected track(s) has/have been erased, the display will show the number of remaining tracks and their total playing time.
To erase the entire disc:
1Press ERASE twice.
➜The display will show the number of tracks and their total playing time. ERASE DISC and
PRESS RECORD will light up.
0If the disc is finalized, CD will appear on the display after inserting a CDRW in the recorder.The recorder will ask you to confirm unfinalizing first. Confirm by pressing the EASY JOG/ENTER key or ENTER on the remote control.
2Press RECORD.
➜The display will show the total countdown time and ERASE The entire disc will be erased.
Erasing an entire disc may take up to 15 seconds.
Playing a CD
English
1Press PLAY/PAUSE 2; to start CD play.
➜2 will light up and the track number and track time of the track in play will appear on the display.
2Press Display once, twice or three times to see:
➜Remaining track time, total remaining time, permanent text information and track time (see Menu mode).
3To interrupt play temporarily, press PLAY/PAUSE 2; again.
➜; will light on the display
4To continue play, press PLAY/PAUSE 2; again.
5To stop play, press STOP 9.
➜The number of tracks and the total playing time will appear on the display.
Selecting a track
Selecting a track during play
1Turn the EASY JOG/ENTER key until the required track number appears on the display.
➜ Play will skip to the beginning of the selected track.
Selecting a track when CD play is stopped
1Turn the EASY JOG/ENTER key until the required track number appears on the display.
2Press EASY JOG/ENTER or ENTER on the remote control to confirm or press PLAY/PAUSE 2; to start playing.
Note:You can also enter the required track number using the numerical keys on the remote control. For 2 digit numbers, press the keys in rapid succession.
21
