Recording
1To start recording, press Play on the external source from
which you want to record.The CD recorder automatically
starts recording.
0If, however, you start the source during a track, recording
will start at the beginning of the next track or after
2.7 seconds of silence in analog recordings.
0Track numbers are automatically incremented. During an
analog recording you can insert additional track numbers
during recording by simply pressing TRACK INCR. on the
remote control.
0The EASY JOG/ENTER key can be used to adjust the
recording level.
0The recorder stops automatically in case of digital recording
from a CD.With AUTO TRACK ON, the recorder pauses
and waits for a new track for 1 minute before going to
stop. Recordings from DAT, DCC or analog sources will
only stop after 20 seconds of silence.
2To stop recording manually, press STOP 9on the
CD recorder.
➜sync goes out and the display will show UPDATE for
several seconds.
Finalizing
If you want to play the recorded CD(RW) on a normal
CD player, you must first finalize the disc. Please note that
you cannot add anymore tracks on a finalized CDR.
See Finalizing CDR and CDRW discs.
Recording a single track
This feature enables you to record a single track from a
CD, LP or cassette.
Preparing
1Place an unfinalized recordable disc, absolutely free of
scratches and dust particles in the CD recorder tray.
2Press SOURCE repeatedly to select the type of connection
you made to your source of recording. Examples:
- CD-player is connected with its digital out connector
directly to the digital in connector of your CD-recorder:
connection is DIGITAL I.
- CD-player is connected with its analog out connectors
directly to analog in connectors of your CD-recorder:
connection is ANALOG
- Turntable is connected with its analog out connectors to
amplifier/receiver which is connected to the analog in
connectors of your CD-recorder: connection is ANALOG
➜DIGITAL I,OPTICAL I or ANALOG lights up and
DIGITAL 1,OPTICAL 1 or ANALOG will appear on
the display.
3With the recorder stopped, press RECORDING TYPE two
times to to select REC TRACK for recording of a single
track.
➜dand sync start to flash and the display shows the
selection.
Recording
1To start recording, press Play on the external source from
which you want to record.The CD recorder automatically
starts recording.
0If, however, you start the source during a track, recording
will start at the beginning of the next track or after
2.7 seconds of silence in analog recordings.
0The EASY JOG/ENTER key can be used to adjust the
recording level.
0The recorder stops automatically in case of digital recording
from a CD. Recordings from DAT, DCC or analog sources
will only stop after 20 seconds of silence.
2To stop recording manually, press STOP 9on the
CD recorder.
➜sync goes out and the display will show UPDATE for
several seconds.
Finalizing
If you want to play the recorded CDR(W) on a normal
CD player, you must first finalize the disc. Please note that
you cannot add anymore tracks on a finalized CDR.
See Finalizing CDR and CDRW discs.
Recording
18
English
xp CDR 600/00_01 English 06-04-2001 18:19 Pagina 18