Philips CDR-600 C. Reviewing CD text in memory, D.Auto track increment

C. Reviewing CD text in memory
CD text is stored in the recorder’s memory.When a
CDR(W) is finalized, the CD Text will be written on the
disc and removed from the recorder’s memory.With the
MEMORY VIEW function you can view/delete the CD text
in the recorder’s memory for each unfinalized disc.The
amount of memory used is displayed each time the tray
opens with an unfinalized CDR(W) inserted
(e.g. MEMORY 9%).
1Press STORE/MENU.
➜TEXT EDIT will appear on the display.
2Rotate the EASY JOG/ENTER key to select the
MEMORY VIEW submenu.
➜MEMORY VIEW will appear on the display.
3Press EASY JOG/ENTER to confirm.
➜The first album title in the recorder memory will
appear on the display.
4Select the album title you wish to erase.
5Press EASY JOG/ENTER to confirm.
➜ERASE MEMORY will appear on the display.
6Press the EASY JOG/ENTER key to confirm the erasure of
the text for that particular disc.
➜UPDATE will appear on the display.
7Press STORE/MENU to return to the submenu or
STOP 9 to exit.
Notes:
If there are no discs in the memory, the message
MEMORY EMPTY will appear on the display.
When the text memory of your CD recorder is full,
the message MEMORY FULL will appear, followed by
FINALIZE CD. If you want to add a CD to the list of discs
for which text is stored, you will have to erase a disc from this
list or finalize another disc for which text is stored.
MEMORY FULL/FINALIZE CD may also appear when
unfinalizing a CDRW disc for which text was stored
(see ‘Unfinalizing CDRW discs’).The same action(s) should
be taken in order to obtain memory space.
D.Auto track increment
Track increments
During synchronised recordings, track numbers will be
copied from the original.This will be done automatically for
digital sources. For analog recordings, the set can detect
silences (longer then 2.7 seconds) in the source material
and start a new track (Auto track increment).
Auto Track is however dependent on the quality of the
analog source material and will not always increase the
track number like on the original.
Auto Track is default switched on. If you wish to switch
Auto Track off or on:
1Press STORE/MENU.
➜TEXT EDIT will appear on the display.
2Rotate the EASY JOG/ENTER key to select the
AUTO TRACK submenu.
➜AUTO TRACK will appear on the display.
3Press EASY JOG/ENTER to confirm.
➜ON or OFF will appear on the display.
4Turn the EASY JOG/ENTER key to select Auto track
OFF or ON.
5Press EASY JOG/ENTER to confirm.
➜AUTO TRACK will appear on the display.
6Press STOP 9 to exit.
During analog recording, you can always insert track
numbers manually by pressing TRACK INCR. on the remote
control. It is not possible to add track numbers manually
during digital recording.The minimum track length is 4 sec.
Track numbers cannot be changed after recording.
Note:Auto Track is always active during synchronised
recordings.
AUTO TRACK
ON
OFF
MEMORY VIEW CD 1
CD 2
CD N
Menu mode
25
English
xp CDR 600/00_01 English 06-04-2001 18:20 Pagina 25