PLAYING
Selecting a track when CD play is stopped
1Briefly press ∞ or § one or more times.
2Press PLAY.
➜Play starts at the selected track.
or
• Press the required track number using the numerical keys on the remote control. For
Searching during CD play
1Hold down ∞ or § (or 5 or 6 on the remote control).
➜The player first searches backwards or forwards at 10 times normal speed with sound at low volume, then goes to fast reverse or fast forward with sound muted.
2Release the button at the desired passage. ➜ Play starts at the desired passage.
Note: During Shuffle, Repeat or Program play, search is restricted to within the track being played at the time.
Shuffle play
1Press SHUFFLE (or PLAY) on the remote control before or during CD play to start shuffle play.
➜The tracks on the CD (or program if set) play in random order. SHUFFLE will appear on the display between tracks.
2Press SHUFFLE again to return to normal CD play.
Note: Shuffle is also cleared when you open the disc tray.
Repeat CD, track or program
1Press REPEAT on the remote control one or more times during CD play.
➜When REPEAT 1 appears on the display, the current track plays repeatedly. When REPEAT appears on the display, the disc or program plays repeatedly.
2To return to normal play, press REPEAT one or more times until:
➜ the REPEAT message disappears from the display.
Note:
-You can use shuffle in combination with repeat CD or program play.
-Repeat is also cleared when you open the disc tray.
Programming
You can program up to 30 tracks to play in any desired sequence. Tracks can be programmed more than once, but each time counts as a track.
1On the remote control press PROGRAM to start programming.
➜ PROG flashes on the display.
2Press a track number with the number keys. For
➜On the display, the track number appears briefly, followed by the total programmed tracks and total program time.
3Repeat step 2 for all tracks to be programmed.
4Press STOP or PROGRAM to end programming. ➜ PROG lights continuously.
Note:
-To review the program, press ∞ or § in stop mode.
-To add more tracks to the program, repeat steps 1 through 4.
-If you try to store more than 30 tracks, FULL appears on the display
5Press PLAY to start programmed play.
Clearing a program
1Press STOP if necessary to stop programmed play.
2Press STOP again to clear the program. ➜ PROG disappears from the display.
Note: The program is also cleared when you open the disc tray.
English
17
