Philips CDR 538 Finalizing CD-R& CD-RWdiscs, Unfinalizing CD-RWdiscs, Start analogue recording

Models: CDR 538 CDR 560

1 55
Download 55 pages 7.74 Kb
Page 17
Image 17
Start analogue recording

RECORDING

Start analogue recording

1To start recording, press PLAY on the CD recorder and immediately start the source.

RECORD lights continuously. The track number and recording time used appear on the display.

To record a 3-second silence at the beginning of a track, press PAUSE.

To check the (remaining) recording time, press Display. (This can also be done during the recording.)

2To stop recording, press STOP on the CD recorder. RECORD will go out.

To interrupt recording, press PAUSE.

RECORD will start to flash. Resume at step 1.

After recording the display will show UPDATE for several seconds.

Note: With AUTO TRACK on, the recorder will stop automatically after 20 seconds silence. With AUTO TRACK off, the AUTO STOP mode is disabled.

Finalizing CD-R & CD-RW discs

Finalizing is a simple procedure that is necessary in order to play the discs on a regular (non-recording) CD player.

Note: Finalizing prevents any further recording on a CD-R. A finalized CD-RW must be unfinalized to allow further recording or erasure of tracks.

1Make sure the disc is absolutely free of scratches and dust particles.

2With the recorder stopped press FINALIZE and then within 3 seconds press RECORD.

DIG AUTO TRACK REPEAT 1 TOTAL REM

TRACK TIME CD SYNC

 

ALOG

 

 

 

 

 

 

 

RECORD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FINALIZE

 

PROG

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ERASE

 

 

 

 

L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COPY

 

 

RECORDABLE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The approximate finalization time will appear in the display. RECORD & FINALIZE lights up.

The display counts down through the finalization. On completion, the total number of tracks and the total time recorded will appear on the display.

For CD-R CD RECORDABLE will change to CD on the display. For CD-RW no change will be seen on the display.

Finalizing will last at least 2 minutes.

Note: During finalization, the CD recorder will not accept operating commands.

Unfinalizing CD-RW discs

For CD-RW discs only.

If you want to make more recordings (or to erase tracks) on a finalized disc you must unfinalize it first. The Table of Contents (TOC) on the disc will be removed.

To unfinalize:

1 Press ERASE twice.

On the display, TOC and ERASE will flash.

DIG AUTO TRACK REPEAT 1 TOTAL REM

TRACK TIME CD SYNC

 

LOG

 

RECORD

 

 

 

 

 

 

 

 

 

 

 

FINALIZE

 

PROG

 

ERASE

 

 

 

L

 

COPY

 

 

RECORDABLE

 

 

2Press RECORD within 3 seconds.

TOC and ERASE light up continuously during erasure.

English

Note: This will take approximately 1 minute.

15

Page 17
Image 17
Philips CDR 538 manual Finalizing CD-R& CD-RWdiscs, Unfinalizing CD-RWdiscs, Start analogue recording, Recording, English