Attach the front panel, Mount in the dashboard

Attach the front panel	4 Close the front panel.
1 Attach the trim plate.

2Insert the left side of the panel in the chassis until it is correctly engaged.

3Press the right side of the panel until the mechanism locks it into place.

Mount in the dashboard

Note

•For proper operation of the DVD player, the chassis must be mounted within 20 degree horizontal. Ensure that the unit is mounted within this limitation.

1 If the car does not have an on-board drive or navigation computer, disconnect the negative terminal of the car attery.

•If you disconnect the car battery in a car that has an on-board drive or navigation computer, the computer may lost its memory.

•If the car battery is not disconnected, to avoid short-circuit, ensure that bare wires do not touch each other.

14EN

Page 13

Image 13

Philips CED228 user manual Attach the front panel, Mount in the dashboard, Close the front panel, Attach the trim plate

Contents

Register your product and get support at CED228 Contents Manufactured under license from Dolby Laboratories Safety Environmental information Introduction Your car audio systemWhat’s in the box J ih Overview of the main unit Overview of the remote control SEL Never connect speaker wires with stripes to one another Install the car audioGet started Overview of parts Connect wires without ISO connectors Connect wires ISO connectorsCut off the bigger end of the supplied standard connector Do the other connections, if applicable Ignition switch Connector Connect to Black wire a metal surface of the carIf there is no accessory Connect reverse driving cable Connect parking brake cable Mount in the dashboard Attach the front panelClose the front panel Attach the trim plate 5mm Turn on Install remote control batterySelect display language Press the knob to turn on the unit Set clock PlayLoad discs You can play DVD discs with the following region codes Insert USB deviceAsia Paciﬁ c, Taiwan, Korea Slide down the USB socket cover Skip/search Insert SD/MMC cardIntro play Repeat play Select audio language Select audio modeRandom play Select subtitle language Zoom Listen to radioTune to a radio station Store radio stations in memory Select tuner sensitivity Tune to a preset stationStore stations manually Activate AF/TA/REG/CT functions Play with RDSSearch for an RDS station by PTY Information Program types Adjust sound Adjust settings Press or repeatedly to select the item to be adjusted Select preset equalizerPress EQ/Audio » The current Equalizer setting is displayed Adjust general DVD settings Adjust system settingsBeeps. You can turn Adjust video DVD settings Select language Adjust display settingsView DivX registration code Write down the number for future reference Press to exit Others ResetListen to other devices Detach the front panel Remove the unit Default settingsReplace fuse Turn on/off the screen backlight Negative ground General Power supplyHz 20k Hz Usable sensitivity AM MW 30 uV Troubleshooting Image ﬂ ashes or distorted GlossaryMultimediaCard. a type of memory card with a ﬂ ash memory Region code

Attach the front panel

4 Close the front panel.

1 Attach the trim plate.

Mount in the dashboard