Others, Listen to other devices, Reset

7 Others

Listen to other devices

You can connect an external sound device to the unit.

1Connect the external sound device to the unit by using a 3.5 mm plug.

2Press SOURCE repeatedly until [AUX] is displayed.

2Open the panel, then push the right side panel toward the left side to disengage it from the chassis.

3Take off the panel and store it in the supplied carry case to protect it from dirt or damage.

English

3Operate the device (refer to the instructions supplied with the device).

Detach the front panel

The front panel can be detached and taken with you to deter theft.

Note

•Before installing the unit, detach the front panel.

1Press to release the panel.

Reset

You can reset the unit to its default setting.

1Detach the front panel.

2Press RESET by using a ball-point pen or

a similar tool.

» All settings are erased except clock.

EN 29

Page 28

Image 28

Philips CED228 user manual Others, Listen to other devices, Detach the front panel, Reset, Press to release the panel

Contents

Register your product and get support at CED228 Contents Safety Manufactured under license from Dolby Laboratories Environmental information Introduction Your car audio systemWhat’s in the box Overview of the main unit J ih Overview of the remote control SEL Install the car audio Never connect speaker wires with stripes to one anotherGet started Overview of parts Connect wires ISO connectors Connect wires without ISO connectorsCut off the bigger end of the supplied standard connector Do the other connections, if applicable Ignition switch Connector Connect to Black wire a metal surface of the carIf there is no accessory Connect parking brake cable Connect reverse driving cable Attach the front panel Mount in the dashboardClose the front panel Attach the trim plate 5mm Install remote control battery Turn onSelect display language Press the knob to turn on the unit Set clock PlayLoad discs Insert USB device You can play DVD discs with the following region codesAsia Paciﬁ c, Taiwan, Korea Slide down the USB socket cover Insert SD/MMC card Skip/searchIntro play Repeat play Select audio mode Select audio languageRandom play Select subtitle language Listen to radio ZoomTune to a radio station Store radio stations in memory Select tuner sensitivity Tune to a preset stationStore stations manually Play with RDS Activate AF/TA/REG/CT functionsSearch for an RDS station by PTY Information Program types Adjust settings Adjust sound Press or repeatedly to select the item to be adjusted Select preset equalizerPress EQ/Audio » The current Equalizer setting is displayed Adjust general DVD settings Adjust system settingsBeeps. You can turn Adjust video DVD settings Adjust display settings Select languageView DivX registration code Write down the number for future reference Press to exit Reset OthersListen to other devices Detach the front panel Default settings Remove the unitReplace fuse Turn on/off the screen backlight General Power supply Negative groundHz 20k Hz Usable sensitivity AM MW 30 uV Troubleshooting Glossary Image ﬂ ashes or distortedMultimediaCard. a type of memory card with a ﬂ ash memory Region code