Philips CID3692 Receive call, Listen to music from Bluetooth device, Adjust Bluetooth settings

•[Missed calls]

•[Received calls]

•[Dialed calls]

•[Phone book]

•[Sim phone book]

•[Local phone book]

Or tap to dial number directly, then tap to dial.

Receive call

By default, all incoming calls are received automatically.

1If there is incoming call, [Incoming call...] flashes on the screen. Speak into the Bluetooth microphone.

2When conversation ends, tap (red) to terminate the call.

Tip

•You can select to receive calls manually by setting [Auto answer] to [Off] status.

Switch phone call to the mobile

If you do not want your passenger to hear your incoming call, you can switch the call to the mobile.

1During talking, tap .

»The voice is transferred from the unit’s loudspeaker to the mobile phone.

Listen to music from

Bluetooth device

If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to the music stored on the device through the unit. If the device also supports AudioVideo Remote Control Profile (AVRCP) profile, you can use the control on the unit to play music stored in the device.

1Pair the phone with the unit.

2Tapto return to home menu.

3Tap [Bluetooth].

» The Bluetooth menu is displayed.

4Start to play music stored in the device.

If your device supports AVRCP,

1Tap.

2Tapto start play.

Adjust Bluetooth settings

You can change below Bluetooth settings:

•[Bluetooth]: to turn on or off “Bluetooth” function

•[Auto connect]: to turn on or off “Auto connect” function

•[Auto answer]: to turn on or off “Auto answer” function

•[Pairing code]: to set paring code

•[Phone Book Sync]: to synchronize phone book

20EN