Replace fuse
If there is no power, the fuse may be damaged and need to be replaced.
1Take out the unit from dashboard.
2Check the electric connection.
3Buy a fuse that matches the voltage of the damaged fuse (15A)
4Replace the fuse.
Note
•If the fuse gets damaged immediately after it has been replaced, there may be an internal malfunction. In such case, consult your Philips dealer.
11Product information
Note
•Product information is subject to change without prior notice.
General
Power supply | 12 V DC (11 V - 16 V), |
| negative ground |
Fuse | 15 A |
Suitable speaker | 4 - 8 |
impedance |
|
Maximum power | 50 W x 4 channels |
output |
|
Continuous power | 24 W x 4 channels (4 |
output | 10% T.H.D.) |
2.0 V ( CD play mode; | |
voltage | 1 kHz, 0 dB, 10 k |
| load) |
Subwoofer output | 2.0 V (CD play mode, |
voltage | 61 Hz, 0 dB, 10 k |
| load) |
500 mV | |
Dimensions | 228.4 x 161.5 x 186 mm |
(W x H x D) | |
Weight (main unit) | 2.3 kg |
Disc player |
|
|
|
System | DVD / CD audio / |
| MP3 system |
Frequency response | 20 Hz - 20k Hz |
Signal/noise ratio | >75dB |
Total harmonic | Less than 1% |
distortion |
|
Channel separation | >55dB |
Video signal format | NTSC only |
Video output | 1 +/- 0.2V |
28EN
