Philips D750 manual VIP function, Room functions

48 B – Answering device: 2 Operation

ADAD function, operation

(once you have set up and switched on the ADAD function):

1.The answering device records a message.

2.The telephone calls the telephone number specified by you.

After accepting the ADAD call:

3.The recorded ADAD message is played back

(e. g.: ”There is a new message. Please enter your PIN.”).

4.The answering device now waits 90 seconds for entry of the correct PIN. The “square” (#) key must be pressed before and after the PIN (Entry: # – PIN – #). If the PIN is not entered or is incorrectly entered the connection is broken after 90 seconds. After 5 minutes another attempt is made (a total of 3 attempts).

5.After recognising the correct PIN the answering device plays back all messages not yet heard (as with remote polling).

B – Answering device: 2 Operation 49

	2.10	VIP function
	Using the VIP function, the caller can “avoid” the switched on answering
	device of the SmartLine D750. The call is then signalled by the tone caller
Important	(on delivery: VIP function is switched off; VIP code = ”0000”).
	To be able to use remote control and VIP function, the PIN and VIP
note	codes must be different.
	Whilst the announcement is running, a “VIP caller” must make the follo-
	wing entries. To this he/she requires a telephone with dual tone multifre-
	quency signalling (DTMF) or a code transmitter (as with the remote control):
	Press “square” key (#) – enter VIP code – press (#) again.
Switching	-	-	-	-
the VIP function
		or
on and off

Recording the

ADAD announcement

With handset on-hook: function key -			-
Lift handset -	select recording:
Start recording:		Start recording:
End recording

	Switch on or off -	store setting
Changing	-		-	-	-
the VIP code		-		-	Enter PIN
	Enter new VIP code: 4 digits -			store setting

Entering/ changing ADAD / telephone num- bers

-	-	-	-
		-
(	delete a possibly existing telephone number)
input tel. number: maximum 20 digits -			store

2.11	Room functions
The room functions can be switched on via the remote control (see 4.4). On
delivery the function is switched off. The activation of the room functions is
indicated at the telephone by the display text		.
If a caller switches the ”Room supervision” on, the microphone of the

Switching ADAD	-	-	-
operation on and
off		or
	Switch on or off -	store setting

ADAD test call

You can set up ADAD operation via the remote control (see 4.4). You can check the setup by means of a test call:

The test call must originate from the connection which has also been programmed as the destination of the ADAD telephone number

(ADAD tel. number). After starting the test call via the remote control code, you can replace the handset. The programmed ADAD telephone number is now called automatically. The ADAD announcement is played back as part of the check.

	telephone is activated. The caller can hear what is being said in the room.
	The function is very useful for checking that everything is “OK” at home
	when you are not there.
	When the ”Room announcement” function is activated the microphone
	and the loudspeaker of the telephone is switched on. The caller can talk to
	anyone in the room.
	By switching off the room functions, you are protected from unnoticed
Important	eavesdropping due to ”room supervision”. The room function cannot then
note	be activated by a caller.

Switching	-		-	-
rooms functions	or	-	switch off or on -	store setting
on and off