Philips D750 manual Remote switch on of a switched off answering device, Ments first

52	B – Answering device: 4 Remote control / remote polling
	4.2	Remote switch on of a switched off answering device

	After approx.
	90 seconds:
Tel. number	Request tone	Square key PIN	Square key Positive
enter			ACK tone

Subsequently:

Code for switch on Pos. ACK tone Announc. text(s)

Notice	• to switch on your AD from remote, you have to record the announce-
	ments first.

•switching the operating mode to ”announce 1 + closing with change- over to announce 2”. When no recording space is available, then you switch off the ADAD-function.

4.3Initiating remote control (answering device is switched on)

Enter	Announce., entry	Square key PIN	Square key	Pos
tel. number	must start			ACK tone
Subsequently:	Enter the codes for the individual remote control operations
	(see list).

Important	To be able to use remote control and VIP functions, the PIN and VIP
note	codes must be different.

B – Answering device: 4 Remote control / remote polling 53

4.4Codes for remote operation

In the following table the right hand column lists what you will hear after the input (texts, tones etc.).

Function:	Code	You hear:
Playback new messages	13	message(s)
Playback of all messages	14	message(s)
Next message	#	message(s)
Previous message	*	message(s)
Erase current message	2	message(s)
End playback	0
Playback ADAD announcement	15	ADAD announcm.
Playback info text	16	info text
Playback announcement text 1	17	announcem. text 1
Playback closing text	18	closing text
Playback announcement text 2	19	announcem. text 2
Erase all heard messages	24
Erase all ADAD messages	25
Erase info text	26
Erase announcement text 1	27
Erase closing text	28
Erase announcement 2	29
Record ADAD announcement	35	request tone
Record info text	36	request tone
Record announcement text 1	37	request tone
Record closing text	38	request tone
Record announcement text 2	39	request tone
Terminate recording	0