Philips DVD795SA Rear Panel, AC Power cord, Progressive/Interlace switch, Audio OUT Left/Right

Models: DVD795SA

1 56
Download 56 pages 27.18 Kb
Page 20
Image 20

20 Rear Panel

AC Power cord

Connect to a standard AC outlet to supply power to the Player.

COAXIAL (DIGITAL AUDIO OUT)

Connect an optional audio coaxial digital cable here and to the coaxial digital Audio In jack of a Stereo. Details are on page 14.

OPTICAL (DIGITAL AUDIO OUT)

Connect an optional audio optical cable here and to the optical digital Audio In jack of a Stereo. Details are on page 14. When the OPTICAL jack is not in use, replace its protective cap.

CVBS (VIDEO OUT)

Connect the yellow video cable (supplied) here and to the TV’s

Video In jack. Details are on page 10.

MULTICHANNEL AUDIO OUT

If you have a multiple channel Receiver (one that has con- nections for six speakers), connect the MULTICHANNEL AUDIO OUT jacks on the Player to the corresponding In jacks on the Receiver. Details are on page 15.

Progressive/Interlace switch

Set this switch to Progressive if you have a Progressive Scan TV and you connected the DVD Player to the TV using the Player’s Y Pb/Cb Pr/Cr jacks. Your connection will be as shown on page 12.

Otherwise, set the switch to Interlace. If you do not, you may not have a picture at the TV from the DVD Player.

AUDIO OUT (Left/Right)

Connect the supplied red and white audio cables here and to the Audio In jacks of a television or Receiver. Details are on pages 9-13.

Pr/Cr Pb/Cb Y VIDEO OUT

Connect component video cable here and to the component

Video In jacks of a TV. Details are on page 12.

S-VIDEO (VIDEO OUT)

Connect an S-Video cable here and to the

S-Video In jack of a television. Details are on page 11.

Caution

Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may damage the unit permanently.

Page 20
Image 20
Philips DVD795SA Rear Panel, AC Power cord, Progressive/Interlace switch, Audio OUT Left/Right, Pr/Cr Pb/Cb Y Video OUT