Step 1: Basic Recorder Connections (continued)

AN-

TENNA

EXT2

TV

EXT1

English

 

VIDEO

 

 

(CVBS)

 

AUX - I/O

S-VIDEO

 

(Y/C)

 

 

R

 

TO TV - I/O

AUDIO / VIDEO OUT

COAXIAL

DIGITAL AUDIO OUT

 

 

Option 2

Option 1

OR

DIGITAL IN

TV

TV/Stereo

AV amplifier/

 

receiver

Connecting the audio cables

This connection enables you to listen to the sound. However, this connection is not required if this recorder is connected to the TV using the supplied SCART cable.

Option 1: Using an audio cable

You can connect the recorder to a two channel stereo system (mini system, TV) or receiver in order to enjoy the stereo sound system.

Use the supplied audio cable (red/white ends) to connect the AUDIO L/R OUT sockets to these devices with the same input sockets.

Option 2: Using a coaxial cable

You can connect the recorder to an AV amplifier/receiver in order to enjoy multichannel surround sound.

Use a coaxial cable (not supplied). Connect the COAXIAL (DIGITAL AUDIO) socket on the recorder to the digital input of the amplifier/receiver.

Before you start operating, set the digital audio output settings accordingly (see the section “PLAYBACK settings – Digital Audio Output”). If the AUDIO settings do not match your amplifier’s capabilities, the amplifier may produce a strong, distorted sound or no sound at all.

Helpful Hint:

Do not connect your TV’s audio output sockets to the AUDIO L/R (IN-EXT) sockets on this recorder, this may cause unwanted noise.

TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.

17

Page 17
Image 17
Philips DVDR3440H user manual Connecting the audio cables, Option 1 Using an audio cable, Option 2 Using a coaxial cable