Troubleshooting (continued)
Problem (Playback) | Solution |
|
|
Disc will not play.– Insert the disc with the label facing up.
–Wrong region code. The DVD must be coded for ALL regions or Region 2 in order to play on this recorder.
–There is no recording on the disc or it is not a supported type of disc. Read chapter “Playback from Disc - Playable discs” for details.
–Make sure the disc is not scratched or warped. Clean the disc or replace a new one.
–Check if the disc is defective by trying another disc.
English
The picture is distorted or black and white during playback.
There is picture or sound interference with the TV reception.
Distorted sound coming from a connected
The message
‘UNKNOWN DISC’ appears.
–The disc does not match with the TV colour system standard (PAL/NTSC).
–The disc is dirty, clean the disc.
–Sometimes a small amount of picture distortion may appear. This is not a malfunction.
–Have your antenna or cable TV signal checked.
–
–Do not connect any cables from the recorder to the ‘Phono’ input of your amplifier.
–If you are playing a DTS CD, you have to connect the COAXIAL socket of this recorder to a
–This message may appear if you insert a disc that may have encountered one of the following:
–Error during recording: The title may be missing.
–Error while changing the title/index picture. The original title/index picture may be visible.
–Error while finalizing or the disc has not been finalised.
73
